DEI 10669 Vapor Block Fuel Line Sleeve 0.625″ (16mm) I.D. x 36″ 010669

$27.22

One 36 inch length of Vapor Block with a 5/8 inch inside diameter.

Split Design With Built In Adhesive Flap
Use On Fuel Lines To Prevent Vapor Lock
Easy To Cut To Size
Can Be Used On Any Cable/Hose Or Line For Added Heat Protection
5/8 in. -16 mm I.D. X 36 in

SKU: BGWZ-10669 Category: Hose Cover

Vapor Block(TM) solves the problem of fuel and other fluids boiling from extreme heat and causing a vapor lock situation. Prevent rough idling and difficult starting caused by vapor lock with DEI Vapor Block(TM). Vapor Block(TM) fuel line sleeve was specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling. Vapor Block(TM) installs easily with a split design and adhesive flap. There is no need to disconnect the fuel line to install. Simply wrap Vapor Block(TM) around the line, remove the adhesive liner and press the adhesive flap into place. Made of glass fiber and polyester laminated to an aluminum outer layer, Vapor Block(TM) offers excellent long lasting thermal protection without paying for expensive repairs or modifications. 5DO NOT apply directly to exhaust components.

Additional Attributes:

GTIN: 00607078106698
Material: Glass Fiber/Polyester Laminated/Aluminum
Length: 36
Color: Silver
Inside Diameter: 0.625
Inside Diameter: 16
Width: 0.5
Direct Heat Resistance: 340°F
Includes: One 36 inch length of Vapor Block with a 5/8 inch inside diameter.
Max Temperature Rating: N/A
Product Length: 36.000 in.
Prop 65 – Long label: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 – Short label: WARNING: Cancer and Reproductive Harm – www.p65warnings.cs.gov
Prop 65 Yes/No: Yes
Style: Split Sleeve