DEI 93487 Heat Shroud 2 2.5″ x 50′ 010487B50

$713.85

One 50 foot roll of Heat Shroud with a 2 inch to 2-1/2 inch inside diameter.

Versatility Of Fitting Diameters 1/2 in. To 1 1/4 in.
Convenient Hook/Loop Designed Edges
Withstands 500 Degrees F Continuous/2000 Degrees F Radiant Heat
No Need To Remove Wires And Hoses
Easily Trimmed To Length
Fireproof

SKU: BGWZ-93487 Category: Exhaust Heat Shield

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 – 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 – 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length DO NOT apply directly to exhaust components.

Additional Attributes:

GTIN: 00607078934871
Material: Aluminized Outer Layer Bonded to Fiberglass
Length: 600
Length: 36
Color: Silver
Inside Diameter: 2.5
Width: 2.5
A/N Size: N/A
Direct Heat Resistance: 500°F
Includes: One 50 foot roll of Heat Shroud with a 2 inch to 2-1/2 inch inside diameter.
Max Temperature Rating: 500 Degree
Product Length: 3 ft.
Prop 65 – Long label: WARNING: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 – Short label: WARNING: Cancer and Reproductive Harm – www.p65warnings.cs.gov
Prop 65 Yes/No: Yes