Mishimoto Ford Focus ST Baffled Oil Catch Can Kit, 2013-2018

The Mishimoto Focus ST Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield very little accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Ford Focus STs on the road. The Mishimoto Focus ST catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The kit comes with two direct-fit hoses that connect the catch can with the crankcase and intake manifold. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location, right next to the engine's oil drain plug! Two CNC-machined aluminum, 3/8in barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining

Additional Attributes:

GTIN: 00811580032677
Color: Black
Finish: Aluminum
Install Difficulty: 4
Installation Difficulty: 4
Material: 6061 Aluminum
Prop 65 (C, R or CR): CR
Prop 65 – Short Label: prop65_warning.jpg
Prop 65 Yes/No: Yes
SellingPoint01: Single can mounting inline with the PCV system separates oil particles using 50 micron bronze filter
SellingPoint02: Application specific bracket mounts
SellingPoint03: Black hoses come pre-molded for reliable install
SellingPoint04: Catch Can conveniently located next to the transmission
SellingPoint05: Billet 6061 aluminum sealed can
SellingPoint06: Defends intercooler, intake system, and essential components from oil blow-by
SellingPoint07: Helps reduce carbon build-up on the intake valves
SellingPoint08: Helps maintain proper octane levels to reduce potential detonation
SellingPoint09: Internal air diverter turbulates air longer to improve oil separation
SellingPoint10: Filters and can are fully serviceable
SellingPoint11: N/A
SellingPoint12: Mishimoto Lifetime Warranty
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Catch Can Diameter (in): N/A
TechSpec Chassis Codes: N/A
TechSpec Drain Plug Thread Size: N/A
TechSpec Engine Codes: N/A
TechSpec Height (in): N/A
TechSpec Includes: (1) Compact Baffled Oil Catch Can–(1) Application-Specific Mounting Bracket–(2) Direct-Fit Hoses–(2) 3/8-in Aluminum Barbed Fittings–(4) Worm Gear Clamps–Mounting Hardware–Mishimoto Lifetime Warranty
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Material: N/A
TechSpec Note: N/A
TechSpec Outlet: N/A

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 14 x 10 x 8 inches
Weight: 3 PG