Maximize the effect of your intercooler setup with the Mishimoto Mitsubishi Lancer Evolution 7/8/9 Intercooler Kit! This full kit includes the Mishimoto race intercooler as well as the Mishimoto upper and lower intercooler pipes and couplers. This kit provides a direct-fit unit and completely replaces the restrictive and inefficient factory setup. The Mishimoto intercooler utilizes a large, 3.5-inch thick bar-and-plate core that has been designed with a strategic core composition to provide optimal reductions in intake temperatures and minimal pressure loss. This kit will support vehicles from stock to 600 whp! Our 350 whp test vehicle showed an 8 whp / 10 wtq increase in power compared to the stock intercooler and the Mishimoto intercooler was able to reduce temperatures by 28 degrees Fahrenheit. Not only was this intercooler, kit designed with power and efficiency in mind, but our engineers also crafted smooth cast end tanks to promote proper air dispersion through the core, improved airflow, and exceptional durability. Low air intake temperatures are vital for maximum power output, tuning, and performance. Whether you are taking your Evo to the local rallycross or competing in a time-attack, lower temperatures will be beneficial. Mishimoto intercooler pipes are crafted from lightweight, mandrel-bent aluminum and eliminate restrictions in the factory piping, which allows for improved airflow and quicker turbocharger spool. The included silicone couplers provide improved heat and pressure tolerance and can handle all the boost you can throw at them. This kit is available with a silver or stealth black powder-coated intercooler finish for enhanced durability and protection against road debris. As with all our products, the Mishimoto Evolution Race Intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Additional Attributes:
GTIN: 00840197718865
CARB EO Number: D-759
Install Difficulty: 3
SellingPoint01: Direct-fit kit for the Mitsubishi Lancer Evolution 7/8/9
SellingPoint02: Available in 22 different custom powder coated colors, including 6 OEM equivalent colors
SellingPoint03: Large, 3.5-in thick bar-and-plate core with strategic core composition for optimal cooling and minimal pressure loss
SellingPoint04: Provided 8 whp / 10 wtq and reduced intake temperatures by 28 F (16 C) compared to the stock cooler on a vehicle making 350 whp
SellingPoint05: Provides efficient intake temperature reduction for vehicles from stock to 600 whp
SellingPoint06: All-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength
SellingPoint07: Lightweight, mandrel-bent, polished aluminum pipes eliminate restrictive bends in the stock piping for improved airflow
SellingPoint08: Bead-rolled pipe ends prevent boost leaks and coupler disconnection
SellingPoint09: Silicone couplers provide increased heat and pressure tolerance
SellingPoint10: Please allow up to 20 days for shipping. Custom Color Collection purchases are powder coated after your order is placed
SellingPoint11: Mishimoto Lifetime Warranty
SellingPoint12: N/A
SellingPoint13: N/A
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: 2001-2007 Lancer Evolution 7/8/9 GSR–2005-2007 Lancer Evolution 8/9 MR
TechSpec Centerline Radius: N/A
TechSpec Chassis Codes: CT9A
TechSpec Core Height (in): 11.65
TechSpec Core Length (in): 22
TechSpec Core Thickness (in): N/A
TechSpec Core Type: Bar-and-Plate
TechSpec Engine Codes: 4G63
TechSpec Includes: (1) Mishimoto Intercooler–(2) Upper Intercooler Pipes–(1) Lower Intercooler Pipe–(3) Upper Pipe Couplers–(2) Lower Pipe Couplers–(1) 3-in T-bolt Clamp–(8) 2.75-in T-bolt Clamps–(1) 2-in T-bolt Clamp–Mishimoto Lifetime Warranty
TechSpec Inlet (in): 2.375
TechSpec Installation Notes: N/A
TechSpec Maximum Recommended Boost Pressure (PSI): N/A
TechSpec Maximum Recommended Horsepower: N/A
TechSpec Note: Each individual order is powder coated on demand, therefore there will be an extended timeframe (Up to 20 days) between order placement and actual shipment. Tracking information will be provided upon order shipment after coating. Please review your color selection carefully and contact us immediately at 1.877.GOMISHI if you need to make changes to your order. Any changes to your order must be made within 1 business day of the original order.—-Returns will not be accepted on any items within our Custom Finish program.—-All “OEM Color Equivalent” finishes have been carefully selected by our team. These coatings are not exact matches due to differences between powder coat and liquid paint. Our team has verified that the color equivalents we offer are a very close match to the OEM paint.–This intercooler can be used with stock or aftermarket intercooler pipes. The CNC mounting pegs must be installed by the customer.
TechSpec Outlet (in): 2.5
TechSpec Overall Height (in): 14.5
TechSpec Overall Length (in): 31.5
TechSpec Overall Width (in): 5.75
TechSpec Pipe Diameter: N/A
TechSpec Pipe Length: N/A
TechSpec Pipe Shape: N/A
TechSpec Weight (lbs): 27
Extended Information:
Emissions : EPA Eligible
Life Cycle Status: Available To Order
Packaging:
Quantity of Each: 1
Package UOM: EA
Dimension: 38 x 18.5 x 18.5 inches
Weight: 41 PG
Reviews
There are no reviews yet.