Sale!

HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-3/4 IN. TUBE DIA.; 3 IN. COLL.; MID-LENGTH DESIGN

HEDMAN HEDDERS STANDARD UNCOATED HEADERS; 1-3/4 IN. TUBE DIA.; 3 IN. COLL.; MID-LENGTH DESIGN

Original price was: $1,583.26.Current price is: $1,335.88.

Standard Uncoated Headers; 1-3/4 in. Tube Dia.; 3 in. Coll.; MID-LENGTH Design

Handcrafted, Mild Steel Construction.
The Mid-Length Tube Header Design Provides Significantly More Low and Mid-range Power than Cast Manifolds, and Provide Better Ground Clearance And Component Compatibility Than Long Tube Headers.
Ball & Socket Collector Design requires No Gasket, and Allows For More Exhaust System Misalignment than Old School, Gasket-Style Header Collectors
Includes All The Necessary Mounting Hardware, Gaskets and Reducers (exhaust adapters)
Limted Lifetime Warranty On Construction, Five Year Warranty on Factory-Applied Header Coating!
Proud To Say, Made In The USA, Since 1954!

SKU: FBLG-89511 Category: Collecteur d'échappement Brands: Hedman Hedders

Additional Attributes:

GTIN: 00732611895118
Air Conditioning: Yes
Automatic Transmission – Column: Yes
Automatic Transmission – Floor: No
Bolts/Studs Included: Yes
California Proposition 65: WARNING: Cancer. For more info visit www.P65Warnings.ca.gov
Catalytic Converter(s) Included: No
Collector Attachment: 3 in.
Collector Bolts Included: Yes
Collector Diameter: 3 in.
Collector Size: 3 in.
Collector Style: BALL and SOCKET Style (Gasketless)
Contents: headers, gaskets (when applicable), 3-bolt exhaust adapters, hardware
Crossover Pipe Included: Yes
Crossover Pipe Style: Y-pipe
Cylinder Head Port Shape: Square
Cylinder Head: Stock Profile Heads
E.O. #: Yes
Emissions Notes: EO# D167-36 (click here for covered vehicles in ARB.CA.GOV document)
Exhaust System Dia: 3 in.
Finish Type: UNCOATED Mild Steel! Shipped with Temporary Paint.
Finish: Uncoated
Flange Style: Standard
Flange Thickness: 0.375 in.
Footnotes: 144. Complete with Y-Pipe to single catalytic converter.
Gasket Or Seal Included: Yes
Header Construction: MILD STEEL- Standard-Duty
Header Fasteners Included: Yes
Header Finish: Uncoated
Header Material: Mild Steel
Header Port Shape: Square
Header Style: Mid-Length Tube
Installation Hardware Included: Yes
Installation Notes: 2 check valves must be purchased separately! (Standard Motor #AV7 or equivalent)
Key Feature: With A.I.R.
Manual Transmission – Column: No
Manual Transmission – Floor: No
Material: Mild Steel
Motor Mounts Included: No
Mounting Hardware Included: Yes
Notes: 88-97 Ford F150-F250-F350 (light-duty); 2-4WD 460 w/AIR
O2 Provision: Yes
Package Contents: Headers, ball and socket reducers (exhaust adapters), gaskets, mounting hardware
Port Shape: Square
Power Steering: Yes
Primary Tube Diameter (in): 1.75 in.
Primary Tube Gauge: 16g
Quantity: Sold as a kit.
Reducer Outlet Size: 3 in.
Reducers Included: Yes
Replacement Gasket: 27680
Replacement Head Flange Gasket: 27680
Transmission Compatibility: Will NOT fit C6 Transmission models, due to transmission crossmember location.
Tube Design: Standard
Tube Diameter: 1-3/4 in.
Tube Length: Mid-Length Tubes
Tube Material Thickness: 16g
Tube Size: 1-3/4 in.
Tube Style: Mid-Length
Tuned: No
Variations: 86511
Weld-Up: No
with A.I.R. System: Yes
with EGR: Yes
Y-Pipe Included: Yes