<p>When performing an LS engine swap into classic muscle cars and trucks, the use of an aftermarket, steel oil pan usually provides better, cross member, component and ground clearance than GM's factory, cast aluminum pan. The only hurdle with this swap is that GM integrated the oil filter mounting flange and passage ways into the factory cast pan. Remove the factory LS pan, and you lose a place to spin-on your oil filter.</p><p>This LS swap specific oil pan and filter relocation system combo kit eliminates this hurdle by including both a rear sump oil pan that clears the vehicle's cross member, and a complete oil filter relocation system that allows you to relocate the oil filter from the factory LS pan to the firewall, fenderwell or other easy to reach location on the vehicle.</p><p>The compact, 5 qt., RED Painted pan in this kit has two integrated -10AN fittings that you attach the 90 degree hose fittings to, then plumb the oil lines to the remote mount, cast aluminum filter base. The kit includes a special oil pump pickup tube designed specifically for the oil pan, a complete oil pan gasket set and mounting bolts.</p><p>The remote base is a single filter unit that has vertical ports, and it includes 30" hoses, 4 hose fittings and filter nipple. This kit is ideal if space around the remote base is limited. The only thing not included is a standard PH8A (Fram #), or equivalent, oil filter.</p>
Additional Attributes:
	GTIN: 00086923001751
	Baffled: No
	Bolts/Studs Included: Yes
	Bypass Mounting Style: No Bypass Adapter
	California Proposition 65: WARNING: Cancer & Reproductive Harm. For more info visit www.P65Warnings.ca.gov
	Capacity: 5 Qts.
	Color/Finish: RED
	Color: RED
	Construction: Stamped/Fab
	Contents: Pan, Pickup,Remote Filter Base, Oil Lines, Fittings, Nipple, Gaskets & Hardware
	Crank Shaft Wiper Included: No
	Depth: 2 in. at front of Sump; 6 in. at Rear
	Dipstick Provision: No
	Drain Plug Included: Yes
	Drain Plug Thread Size: 1/2 in.-20
	Engine Manufacturer: Chevrolet
	Engine Notes: 4.8L, 5.3L, 6.0L GM LS Series Engines
	Engine Oil Cooler Return Fitting: No
	Engine: Chevy LS Series
	Fastener(s) Included: Yes
	Filter Bypass Included: No
	Filter Bypass Style: No Bypass. Special LS Swap Pan Use
	Filter Nipple Thread Size: 3/4 in.-16
	Filtration Construction: CAST Aluminum
	Finish Type: Painted
	Finish: RED Painted
	Fitting Material: Brass
	Fitting Quantity: 4
	Fitting Thread: -10 AN
	Fitting Type: Hose Barb
	Fluid Capacity: 5 Qt
	Gasket Or Seal Included: Yes
	Hardware Included: YES
	Hose Connection Type: Push Lock
	Hose ID: 1/2 in.
	Hose Length: 30 in.
	Hose Material: Flame Resistant Nitrile/Rubber
	Hose OD: 0.75 in.
	IMPORTANT!: Some LS have dipstick in pan and will require drilling of dipstick port on block
	Installation Hardware Included: Yes
	Kicked Out: No
	Kit Type: Oil Pan With LS Swap Filter Integration Kit
	Length: 7 in.
	Material: Steel
	Mounting Hardware Included: Yes
	Nipple Included: Yes
	Oil Filter Compatibility: PH8A or Equivalent (or equivalent)
	Oil Line Kit Included: Yes
	Oil Pan Bolts Included: Yes
	Oil Pan Capacity: 5 Qt. Capacity
	Oil Pan Depth (in): 6 in.
	Oil Pan Finish: Red Painted
	Oil Pan Material: Steel
	Pan Capacity: 5 Qts.
	Photo Disclaimer: Actual product design, construction, or included components may vary.
	Pickup #: 2522
	Pickup Included: Yes
	Plug Included: Yes
	Port Size: -10AN
	Pressure Rating: 300 PSI
	Product Type: Oil Pan / Filter Integration Kit Combos
	Race Only: No
	Remote Base Filter Size: PH8A (or equivalent)
	Remote Base Included: Yes
	Remote Filter Base Style: SINGLE Filter, Vertical Port
	Replacement Gasket Set: 4336
	Replacement Nipple: 1034
	Replacement Oil Pan: 1108
	Single or Dual Filter: Single
	Stroker Clearanced: No
	Sump Dimensions: 6 in. Deep, 8.25 in. Wide,7 in. Long
	Sump Location: Rear
	Sump Style: Wet Sump
	Type: Oil Pan with Remote Filter Kit
	Vehicle Family: A-Body (GM) 1964-67
	Vehicle Specific Listings: LS engine into Early GM cars/trucks; 82-04 Chevy / GMC S10 / S15, Blazer / Jimmy
	Width: 8-1/4 in.
	Windage Tray Included: No
Extended Information:
	Emissions : CARB Eligible
	Life Cycle Status: Available To Order
Packaging:
	Quantity of Each: 1
	Package UOM: KT
	Dimension: 25.5 x 12.5 x 10.5 inches
	Weight: 15.25 PG






Reviews
There are no reviews yet.