Power Steering Assist Motor / Module

60 Amp Custom Build Race Unit

$2,995.31

60 Amp Custom Build Electric Power Assisted Steering Race Unit

INCLUDED IN KIT: 60 amp electric motor unit Mounting hardware Prewired control module Cooling fans NOTES: Features a low 9 amp draw Average install time of 10 hours Requires some cutting Column not included Number of fans varies/application

SKU: GMSX-1402-G Category: Power Steering Assist Motor / Module

these must be purchased separately. THIS CUSTOM APPLICATION WILL REQUIRE THE FOLLOWING INFORMATION IN ORDER TO BEGIN PROCESSING THE REQUEST: Is the vehicle OEM from steering wheel to steering box? On OEM columns we will need to know the steering tube OD and steering shaft size/style (DD? Round? Splined? Hollow?). If equipped with an aftermarket column we will need to know the steering tube OD and shaft size (DD? Round? Splined? Hollow?). If the vehicle has a stock steering box, we will need to know what the box out put is (DD? Round? Splined? Hollow?). Are you adapting to a steering rack? You will be responsible for the shaft from the rack to the firewall. 3/4''DD shaft is preferred but not required, we will try to adapt to the shaft size. We will need to know this measurement to supply the proper u-joint. Need an aftermarket column? We can provide 32'' universal IDIDIT tilt column, you will need to cut and modify at your own discretion. HOW IT WORKS: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. An ADJUSTABLE POTENTIOMETER gives you control over the amount of assistance provided, allowing you to fine tune your EPAS experience. For example, you can have maximum power assist while on a parking lot, and less on the highway. The system is only active while turning. The installation of this system should be done by a professional mechanic or a very knowledgeable amateur.