Heatshield Products 274012 – Thrmflct Slv 1/2 id x 3 ft hook&loop

$65.80

Thermaflect Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). Use on your fuel lines, wiring looms, air intake, and air conditioning hoses to shield heat.

Continuous operating reflective temperature of 1100F, 2000F intermittent
Capable of reducing up to 90 percent of radiant heat
Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
hook & loop allows installation without component assembly

SKU: BHCF-274012 Category: Thermal Protection Tubing

a 3 foot length our Thermaflect Sleeve weighs less than 6 inches of the old silicone covered stuff of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Thermaflect Sleeve withstands 1100F of continuous radiant heat and 500F direct heat. Also available in sewn seam.

Additional Attributes:

GTIN: 00819825011494
Color: Silver/Aluminum
Conductivity Warning: Caution this material is electrically conductive; be sure to insulate any terminals that might come in contact with this product.
Install Tips: Hook & loop seam
Instructions Included: No
Insulation Type: Radiant heat barrier, needs 1 inch of air space, should not contact heat source.
Manufacturer Product Link: https://www.heatshieldproducts.com/thermaflect-sleeve-hook-and-loop
Material: Proprietary Aluminized Fiberglass
Operating Temperature: 1100F
Peak Temperature: 2000F
Product Dimensions: 1/2 id x 3 ft H&L seam
Prop 65 (C, R or CR): CR
Prop 65 – Short Label: Prop 2065CA.pdf
Prop 65 Warning Chemical Listing: WARNING: This product can expose you to lead, a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Prop 65 Yes/No: Yes
Safety Equipment Warning: Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this product.