Mishimoto Subaru WRX Baffled Oil Catch Can System, 2008-2014

The Mishimoto Baffled Oil Catch Can Kit is designed and engineered to work on your WRX to eliminate harmful blow by vapors from re-entering your engine. The EJ25 in the WRX is known for producing blow by gases during normal to severe driving, especially when more boost and horsepower is added to the engine. This oil blowby can work its way into your intake system, reducing the octane rating of your fuel and potentially causing damaging detonation, which has a profoundly negative effect on the already sensitive EJ25 engine. The kit uses our small baffled catch cans with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The turbo inlet side of the kit utilizes our three-port baffled catch can to catch as much oil vapors as possible. It also includes two direct fit mounting brackets that not only is extremely easy to install but also fits right hand drive as well! The kit comes with six direct fit hoses that fit as if they were stock. The hoses are designed to fit right onto the PCV valve ports and into the turbo inlet ports. Plastic, barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with Mishimoto's lifetime warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

Additional Attributes:

GTIN: 00811580032813
Color: Black
Finish: Powder Coat
Install Difficulty: 4
Installation Difficulty: 3
Material: 6061 Aluminum
Prop 65 (C, R or CR): CR
Prop 65 – Short Label: prop65_warning.jpg
Prop 65 Yes/No: Yes
SellingPoint01: Direct fit for 2008-2014 Subaru WRX
SellingPoint02: Separates oil particles using 50 micron bronze filter
SellingPoint03: Application-specific brackets locate catch cans in a serviceable location
SellingPoint04: Fully sealed, billet 6061 aluminum catch cans
SellingPoint05: Protects turbocharged boxer engine from oil blow-by
SellingPoint06: Helps maintain proper octane levels to reduce detonation
SellingPoint07: Catch can and filters are fully serviceable
SellingPoint08: Internal air diverter turbulates air longer to improve oil separation
SellingPoint09: No cutting or modification required
SellingPoint10: Offered with black, direct fit hoses
SellingPoint11: Fits LHD and RHD models
SellingPoint12: Patent numberD910,727
SellingPoint13: Mishimoto Lifetime Warranty
SellingPoint14: N/A
SellingPoint15: N/A
TechSpec Applications: N/A
TechSpec Catch Can Diameter (in): N/A
TechSpec Chassis Codes: N/A
TechSpec Drain Plug Thread Size: N/A
TechSpec Engine Codes: N/A
TechSpec Height (in): N/A
TechSpec Includes: N/A
TechSpec Inlet: N/A
TechSpec Installation Notes: N/A
TechSpec Material: N/A
TechSpec Note: N/A
TechSpec Outlet: N/A

Extended Information:

Emissions : Emissions Compliance Exempt
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 20 x 14 x 8 inches
Weight: 11 PG