Engine Oil Filter Remote Mounting Kit

Pareto Point Top Dog-V 3.0A Kit

$421.88

easy to install, requires no engine modifications

Improved mileage (up to 3%)
Increased horsepower (higher efficiency, less energy consumption)
Extended oil service intervals (at least two to three times longer)
Longer engine life (decreased wear by at least half, doubling engine life)
Lower repair costs (less parts replacement and labor costs)
Reduced Environmental Footprint
Fast, easy installation, with no engine modification required

SKU: JKPL-1-30A-TDV Category: Engine Oil Filter Remote Mounting Kit

Today’s internal combustion engines work extremely hard. and clean oil is essential for your engine to perform at its best. Unfortunately, your full-flow filter lacks the density capacity to trap the most dangerous debris (ten or less microns in size). As this debris passes through the engine, it causes a condition known as engine wear, which is responsible for over 85% of premature component failures. Ensuring the cleanest possible oil is the most important step you can take to protect your engine. Making frequent oil changes is expensive and time-consuming, and waiting too long between changes can be disastrous. By diverting a small amount of oil into a dense advanced filter, your oil is slowly and thoroughly filtered to about 5 microns, significantly reducing engine wear. This increases engine performance, mileage, and engine longevity. TopDog-V is inexpensive, quick to install, and requires no engine modification. TopDog-V has won numerous awards and has received high customer satisfaction marks.

Additional Attributes:

GTIN: 00887753800893
Material: 6061 Billet aluminum/rubber hose/brass fittings
Thickness: 1.25
Grade Type: Performance
Gasket Or Seal Included: Yes
Maximum Filter Diameter: 3.0
Oil Cooler Ports: No
Filter Specification: Advanced oil filter,
Rated to 2-5 microns
Donaldson P564967
Fittings Specifications: 2 straight 1/8 IN NPT
2 elbow 1/8 IN NPT
Hydraulic Hose Specifications: 8 FT of 1/8 IN rubber hose rated to 350F
Nipple Thread Pitch Size Specifications: 3/4IN- 16 (A)
O-Ring Specifications: O-rings (adapter bottom sealing, nipple sealing + extra set
Patent Numbers: U.S. Pat No. 8,945,400; 9,109,478; Others pending
PPI Proprietary: Yes
Prop 65 – Short Label: WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
Prop 65 Y/N: Yes
Remote Mount Details: Includes appropriate internal plugs, screws and internal fittings
System Adapter Diameter: 3 IN
Thread Diameter: 3/4 in. x 16